final progress

I have successfully tweeted through ThingSpeak from the Arduino sensor, now I need to test how it works when pressing the button to take a picture on camera.

I first did a test with the pressure sensor and was able to tweets the volts coming from the sensor

I then tested sending a tweet upon pressing the sensor with my modified tweet

I am excited that this is working! Now I would like to see how I can connect the camera with the Arduino.

I made a new Twitter account specifically
for this project so I don't have to make my followers on my private account deal with all of these tweets. It is successfully work now, too.

I have learned that ThingSpeak does not like sending the same tweet multiple times because I tried for an hour sending the same tweet. So, I tried changing the tweet and it seems to be working again.
The only problem I am having now is the sensor on the Arduino sends multiple tweets, around 10, when I only press the sensor once. I hope that once I have the sensor taped down the problem will be resolved.